Page Comparison

PNE-1209

https://slxdev.atlassian.net/browse/PNE-1209

Steps to reproduce:

1. In peconfig select any machine > Select Alerts tab

2. Edit > Add Row

3. Select State Type = Setup or Downtime

4. Fill out all other mandatory fields > Close

5. Save > Refresh > Select the same machine > Alerts

6. Select the new Alert

Expected behavior: State Type = Setup/Downtime
Actual behavior: State Type = Unknown

CS-3835

https://slxdev.atlassian.net/browse/CS-3835

Users having issues logging onto website from Edge for Flash Reporting
Using Edge because we can't access through Chrome

Sample URL

https://saas36.shoplogix.com/whiteboard/#/ https://saas36.shoplogix.com/

CS-3698

https://slxdev.atlassian.net/browse/CS-3698

482/5000
whiteboard does not record data

Collector PC is ok
Connector is ok
BTCN is OK
BTCN records machine data but is not reflected in the whitebord

Watts Company
https://saas5.shoplogix.com/whiteboard/#/shiftrollup/areas/7

machines affected:

EVI-14 Machine ID: XMLCN_412 Account: CN_watts4
EVI-15 Machine ID: XMLCN_410 Account: CN_watts4
EVI-16 Machine ID: XMLCN_416 Account: CN_watts4
EVI-24 Machine ID: XMLCN_414 Account: CN_watts4

Sample URL

https://saas5.shoplogix.com/

CS-3502

https://slxdev.atlassian.net/browse/CS-3502

The server flash reports are not responding, show server problem. You have to logout from the server and log in to load the reports. But after some minutes machines begin to display the message "unable to load machine legend"

The logs don't show any apparent errors (web, dataprocessor, main)

Sample URL

saas32.shoplogix.com

CS-3384

https://slxdev.atlassian.net/browse/CS-3384

Groups are in the configuration, but not exporting to the API report.

Favourite showing the grouping impact.
https://dfa.shoplogix.com/main.html?sharedfavourite=1596656360154&stripped=1&autosize=1

https://dfa.shoplogix.com/web/api/export/summary?start=20200701&end=20200801&metrics=reasons&groupBy=Machine&format=xml&machines=894B4B12-D324-FF85-319F-ACD8F848AD6B&reasonInstance=false

You will notice that No product shows Nogroup.
Is Capacity a reserved word?

Variable in the configuration.
<Variable>
<Name>No product</Name>
<ManualEntryFieldType>undefined</ManualEntryFieldType>
<Group>Capacity, Material</Group>
<DowntimeReason>1</DowntimeReason>

CS-3955

https://slxdev.atlassian.net/browse/CS-3955

Calendars keep reverting to older versions on saas12
When trying to fix, I found on P270 overlapping shifts, and Unscheduled shifts (P270 Calendar HTML.png)
If an attempt is made to correct the issue, like deleting one of the shifts, the breaks disappear;
Attempts to copy shifts created gaps in the calendar (P270 Calendar HTML 2.png)
The Flash calendar and the shift report both seem normal

Sample URL

https://saas12.shoplogix.com/shiftcalendar/#/?machine=878DAE5B-E393-2966-95DC-AC6EA04643F9 https://saas12.shoplogix.com/ShiftCalendar.html?server=BoaeL8AjPAFPo3zbXx2DB3325atEKLFahEe37lS6qwvqs&machine=878DAE5B-E393-2966-95DC-AC6EA04643F9&ver=132436157954470000

CS-3209

https://slxdev.atlassian.net/browse/CS-3209

I realize that the reason of scrap sent to Shoplogix dind’t show correctly in the Whiteboard.

For example, in KM3201 last July 21st, one of the parts rejected for “Test parts” wasn’t recognize the reason (only the amount) by Shoplogix.

PROD-197

https://slxdev.atlassian.net/browse/PROD-197

Context

Job upload has been configured as you specified in the previous case. Job Data is being uploaded and is on our server: D:\Shoplogix\Enterprise\XmlDataBackup\CN_CoverisHal\jobs\FR\Campine\Jobs

Job File was sent to you today too, but also can be found in the above folder.

There is only 1 area in the plant Campine https://saas126.shoplogix.com/whiteboard/#/shiftrollup/areas/45

Please could you let me know what the next steps are from our end to get the jobs uploaded to the machines

Tasks

• Custom xslt that will replicate job record to all machines when AreaID is specified in JobScheduleEdit entry

• Place xslt on saas126 in D:\Shoplogix\Enterprise\transforms

• Configure the applicable plants to use this new xslt i.e. set <JobScheduleTransform />value to new xslt name e.g. <JobScheduleTransform>CoverisJobTransform</JobScheduleTransform>

PNE-1199

https://slxdev.atlassian.net/browse/PNE-1199

Need to create sections for Area Get / Put requests similar to Machine sections so that only relevant data is being transferred / Modified.

Backend:

Need 3 API Requests:

• Area Settings

• Area Job Filters (for Job Scheduling)

• Filters for Analytics Portals

Front End:

• create models for handling new api requests for area

Current Behavior:

A full dump of AreaConfig is being sent via api request to get area.

EX: https://qa3.shoplogix.com/web/api/config/area/5

Expected Behavior:

Each API will return only relevant information and edit only relevant information

PNE-1165

https://slxdev.atlassian.net/browse/PNE-1165

Default Scrap Cycle Factor should work the same as Cycle Factor to avoid any issues with Total and Good / Total and Scrap part count.

Creating and starting job from Job List view → This should be already working as expected

1. If <AllowZeroCycleFactor>0</AllowZeroCycleFactor> and machine Scrap/Good Cycle Factor = 0 in config, Scrap Cycle Factor in the job should default to '1'.

• When new job is created Scrap Cycle Factor = 1

• Scrap Cycle Factor in Job edit can be changed and saved as '0'. However when the job is started Scrap Cycle Factor = 1.

• User cannot change Scrap Cycle Factor to '0' for Running or Completed job.

• User can change and save Scrap Cycle Factor to be > 0.

1. If <AllowZeroCycleFactor>0</AllowZeroCycleFactor> and machine Scrap/Good Cycle Factor <> 0 in config, Scrap Cycle Factor in the job should default to machine Scrap/Good Cycle Factor.

• When new job is created Scrap Cycle Factor = machine Scrap/Good Cycle Factor

• Scrap Cycle Factor in Job edit can be changed and saved as '0'. However when the job is started Scrap Cycle Factor = 1.

• User cannot change Scrap Cycle Factor to '0' for Running or Completed job.

• User can change and save Scrap Cycle Factor to be > 0.

1. If <AllowZeroCycleFactor>1</AllowZeroCycleFactor> and machine Scrap/Good Cycle Factor = 0 in config, Scrap Cycle Factor in the job should default to '1', however '0' is allowed.

• When new job is created Scrap Cycle Factor = 1

• Scrap Cycle Factor in Job edit can be changed and saved as '0'. Started job can have Scrap Cycle Factor = 0.

• User can change Scrap Cycle Factor to '0' for Running or Completed job.

• User can change and save Scrap Cycle Factor to be > 0.

1. If <AllowZeroCycleFactor>1</AllowZeroCycleFactor> and machine Scrap/Good Cycle Factor <> 0 in config, Scrap Cycle Factor in the job should default to machine Scrap/Good Cycle Factor, however '0' is allowed.

• When new job is created Scrap Cycle Factor = machine Scrap/Good Cycle Factor

• Scrap Cycle Factor in Job edit can be changed and saved as '0'. Started job can have Scrap Cycle Factor = 0.

• User can change Scrap Cycle Factor to '0' for Running or Completed job.

• User can change and save Scrap Cycle Factor to be > 0.

Job Upload using xml file - Regardless of AllowZeroCycleFactor

1. If machine Scrap/Good Cycle Factor <> 0 in config:

• When Scrap Cycle Factor is no defined in upload file (Scrap Cycle Factor =''), uploaded job Scrap Cycle Factor SHOULD = machine Scrap/Good Cycle Factor → FAIL, Current Behavior Scrap Cycle Factor = ZERO BAD

• When Scrap Cycle Factor is defined in upload file (including Scrap Cycle Factor = 0), uploaded job Scrap Cycle Factor SHOULD= Scrap Cycle Factor from the upload file → PASS

1. If machine Scrap/Good Cycle Factor = 0 in config:

• When Scrap Cycle Factor is not defined in upload file (Scrap Cycle Factor =''), uploaded job Scrap Cycle Factor = 1 → FAIL

• When Scrap Cycle Factor is defined in upload file (including Scrap Cycle Factor = 0), uploaded job Scrap Cycle Factor = Scrap Cycle Factor from the upload file. → PASS

Starting job thru OPC/PLC file - all needs to be done - ALL FAIL

NOTE: All these behaviors works correctly for CycleFactor

1. If <AllowZeroCycleFactor>0</AllowZeroCycleFactor> and machine Scrap/Good Cycle Factor = 0 in config:

• When Scrap Cycle Factor is not configured in OPC file, Scrap Cycle Factor in started job = 1

• When Scrap Cycle Factor in OPC file = 0, Scrap Cycle Factor in started job = 1

• When Scrap Cycle Factor in OPC file <> 0, Scrap Cycle Factor in started job = Scrap Cycle Factor defined in OPC file

1. If <AllowZeroCycleFactor>0</AllowZeroCycleFactor> and machine Scrap/Good Cycle Factor <> 0 in config:

• When Scrap Cycle Factor is not configured in OPC file, Scrap Cycle Factor in started job = machine Scrap Cycle Factor

• When Scrap Cycle Factor in OPC file = 0, Scrap Cycle Factor in started job = machine Scrap Cycle Factor

• When Scrap Cycle Factor in OPC file <> 0, Scrap Cycle Factor in started job = Scrap Cycle Factor defined in OPC file

1. If <AllowZeroCycleFactor>1</AllowZeroCycleFactor> and machine Scrap/Good Cycle Factor = 0 in config:

• When Scrap Cycle Factor is not configured in OPC file, Scrap Cycle Factor in started job = 1

• When Scrap Cycle Factor in OPC file = 0, Scrap Cycle Factor in started job = 0

• When Scrap Cycle Factor in OPC file <> 0, Scrap Cycle Factor in started job = Scrap Cycle Factor defined in OPC file

1. If <AllowZeroCycleFactor>1</AllowZeroCycleFactor> and machine Scrap/Good Cycle Factor <> 0 in config:

• When Scrap Cycle Factor is not configured in OPC file, Scrap Cycle Factor in started job = machine Scrap/Good Cycle Factor

• When Scrap Cycle Factor in OPC file = 0, Scrap Cycle Factor in started job = 0

• When Scrap Cycle Factor in OPC file <> 0, Scrap Cycle Factor in started job = Scrap Cycle Factor defined in OPC file

PNE-1155

https://slxdev.atlassian.net/browse/PNE-1155

PNE-860 was partially blocked by PNE-1149, this case addresses the rest of the work on the Machine States tab.

• If a new machine state is added and it has the same name as an inactive state, then the new state should replace the old one.

• Due to the change in PNE-1149, the front-end needs to make sure it's sending back the proper active status of the states being changed. So deleted machine states will be inactive, new machine states will be active.

• Micro Stop and Slow Running special states should follow the same rules, and should have validation if their name is changed to an active state.

PNE-1151

https://slxdev.atlassian.net/browse/PNE-1151

Default time span limit is 3 months, while it can be customized thru web.config settings (implemented in https://slxdev.atlassian.net/browse/PNE-932 . However, front end notification in regards to exceeding the time limit and adjusting of start time is always following the default (3 months).

Examples:

1. If TimespanRestrictionSeconds < 3 months (ex: 86400 seconds which is 24 hours) and requested time period is > 86400 seconds → Correct data is retrieved, however no warning in regards to time period limit is displayed and start time is not adjusted to show correct time from End Time (24 hours).

1. If TimespanRestrictionSeconds < 3 months (ex: 86400 seconds) and requested time period is > 3 months → Warning in regards to 3 months limit is displayed and start time is adjusted to show 3 months from End Date (should be 24 hours).

1. If TimespanRestrictionSeconds > default setting (ex: 4 months) and requested time period is between default and set limit (between 3 and 4 months) → Warning in regards to 3 months limit is displayed and start time is adjusted. There should be no warning and no Start Time adjusting.