Bug Fixes

PNE-1649	https://slxdev.atlassian.net/browse/PNE-1649 Example: https://portal-dev.shoplogix.com/app/main#/dashboards/5fb69c0679e716002e3517cc For expected result refer to the following cases: https://slxdev.atlassian.net/browse/CS-4740 https://slxdev.atlassian.net/browse/PNE-1475
PNE-995	https://slxdev.atlassian.net/browse/PNE-995 ~~Precondition:~~ ~~Set machine default Cycle Factor = 0 (in config file)~~ Steps to reproduce: Go to Job List Select any existing non-running job or click on New Click on 'X' in Cycle Factor field --> default machine Cycle Factor is displayed (if default machine Cycle Factor = 0, value '1' is displayed) Save Click on the Saved job from the previous step Expected behavior: Cycle Factor = default machine Cycle Factor (or '1' if default machine Cycle Factor=0) Actual behavior: Cycle Factor = 0 Edit: Same behavior is reproducible for Scrap Cycle Factor
CS-6565	https://slxdev.atlassian.net/browse/CS-6565 I have been trying a lot to have TV screens to stay logged in, I have test different users (made no difference) I place a plug in in Chrome to refresh the page every 120 seconds (made no difference) Place the remember me on the logging and save credentials on Chrome (made no difference) Clear cache and cookies and log in back again (no difference) TV screens do not last more than 2 hours logged in, and some screens have a couple tabs rotating and sometimes is only one of them failing Can you please check if recent update is the root cause, it started yesterday on this account Account: Industrias Licoreras Server: saas124 If so please revert it o something as customer is receiving reports of Screens failing several times at day, and it is taking a lot of time going to remote connection and testing Thanks Sample URL https://saas124.shoplogix.com/whiteboard
CS-6437	https://slxdev.atlassian.net/browse/CS-6437 Customer identified an issue when a machine stops running the machine defaults to an idle state with a specific reason "Run Time - Roll change" without the reason applied to the machine. This seems to be occurring on multiple machines. Further investigation shows that the reason has no OPC ID and not configured to be used in the idle machine state. the machine does not have downtime hold configured either. https://saas126.shoplogix.com/Web/query.axd?type=reasonedit&start=20210208&machines=9FEFFB64-578C-39C4-7A0E-9C2AF6A513E9 Sample URL https://saas126.shoplogix.com/whiteboard/#/perioddetail/9FEFFB64-578C-39C4-7A0E-9C2AF6A513E9/start/20210208T140000.000/end/20210208T220000.000/bucket/60/cycle=1&gauge1=1&gauge2=8&gauge3=3&timeMetric=0&goalgreen=1&goalyellow=0.75&goalred=0.5&scrapgreen=0.02&scrapyellow=0.05&scrapred=0.1
CS-6399	https://slxdev.atlassian.net/browse/CS-6399 Hello, we received a report within values gap with whiteboard result (more than 20% on OEE) I verified dashboard filter, date, widget filter, and also the date on whiteboard. Report shared with you named "SITE HEBDO FARMACLAIR" Nothing seems to be anormal in term of filtering. May you please have a look on this report and tell me what's the problem? many thanks Alexandre Sample URL https://fareva.shoplogix.com/whiteboard/#/areameeting/area/2/start/2021-02-01T00:00:00.000/end/2021-02-08T00:00:00.000 https://portal.shoplogix.com/app/main#/dashboards/601bc057cff20a002d699ca9
CS-6394	https://slxdev.atlassian.net/browse/CS-6394 URGENT: All shoplogix do not work for other info please contact me Sample URL https://saas31.shoplogix.com/whiteboard/#/
CS-6370	https://slxdev.atlassian.net/browse/CS-6370 https://saas55.shoplogix.com/shiftCalendar/#/?machine=BA6B6860-07B5-530F-59C9-C9DB47D56C2B https://saas55.shoplogix.com/shiftCalendar/#/?machine=0BBB4F10-8D3D-C7E9-C3AE-72761B5A4402 If you go to each these links you will see correct shifts. However : if you go to the first link THEN the second within the same tab. The view will retrain it's breaks. This is confusing for the engineer/customer AND if you then hit save (say you're doing dozens of calendars) you could then double save the shifts. This process can be repeated with additional links, and or break combinations so if I go to a thirds link that will be added. As a temporary work around I simply hitting refresh whenever entering a shift scheduler will clear the phantom break. While we wait for a fix. ~Hino Sample URL https://saas55.shoplogix.com/shiftCalendar/#/?machine=BA6B6860-07B5-530F-59C9-C9DB47D56C2B https://saas55.shoplogix.com/shiftCalendar/#/?machine=0BBB4F10-8D3D-C7E9-C3AE-72761B5A4402
CS-6347	https://slxdev.atlassian.net/browse/CS-6347 [Site]: Fairlawn and Ringwood [issue]: Running state is missing from the standard machine state configuration owing to which data is not available on the whiteboard. I also tried to add "Running" state manually but failed [Machine Impacted for Fairlawn] a) L22 OH Merge b)L22 Shrink Wrapper 1 c)L22 Shrink Wrapper 2 d)L1 Rotary Molder - BN [Machine Impacted for Ringwood] a)Chocolate Making 1 b)Chocolate Making 2 c)Panning Manual Sample URL SaaS72 & SaaS85
CS-6068	https://slxdev.atlassian.net/browse/CS-6068 Description Hi Evan, the break on both lines D and E are not displayed the break time is often masked by other brekdown which distorts the calculation. Please found atached the screen of this issue thank you to look at this best regards Sample URL https://fareva.shoplogix.com/whiteboard/#/productionsummary/D6238371-5519-E906-58DD-93A5C3DEDAD1/start/2021-01-25T09:50:00.000/end/2021-01-25T10:50:00.000 https://fareva.shoplogix.com/whiteboard/#/productionsummary/D61B19E5-7815-44D6-6481-93A5C3AC2C99/start/2021-01-25T08:50:00.000/end/2021-01-25T09:50:00.000
CS-5124	https://slxdev.atlassian.net/browse/CS-5124 Cavitation Factor Not Appearing Correctly When Filter Is Used With automotive customers they use the cycle factor extensively and the Analytics Portal Defaults to the Part Cycle Time. This causes the customer confusion as the Cycle time appears wrong because they are not using the correct measure. Additionally the cycle factor needs a formula tweak to allow for easier use. Hino’s notes → I managed to successfully give Robert what he wanted using this equation (sum([Total Good Production])) * (Sum([Job Cycle Factor]),[Job Name]) (sum([Total Good Production])) << sum of part * (Sum([Job Cycle Factor]),[Job Name]) << Sum of parts based on job name? This is because he’s trying to back calculate variables on his machine based on the production.
CS-5035	https://slxdev.atlassian.net/browse/CS-5035 Issue was found while looking at peconfig Microstop, while defined in the configuration GUI, does not show in peconfig (missing MS.png) It shows blank Looking at the Configuration.xml, the line item for Micro Stop is not present (Microstop Missing.txt) Similar to https://slxdev.atlassian.net/browse/CS-4125#icft=CS-4125 where Microstop was changing to a running state Sample URL https://saas25.shoplogix.com/configuration.html https://hunteramenities.shoplogix.com/whiteboard/#/shifthours/AC107D13-6B36-5E5E-F4AD-8FB4E21BD17E/quality=true&cycle=1&gauge1=1&gauge2=8&gauge3=0&timeMetric=0&goalgreen=1&goalyellow=0.75&goalred=0.5&scrapgreen=0.02&scrapyellow=0.05&scrapred=0.1&cycleDP=1&cycleTOL=0&gaugeTOL=0 https://wpinnova.shoplogix.com/peconfig/#/
CS-5009	https://slxdev.atlassian.net/browse/CS-5009 Formerly : AP IAC Yesterday master dashboard The "OEE performance By Area" conditional formatting does not behave the same as the top numeric Widgets, and "OEE elements by Area" and graphs in general Also there is a weird space between the Downtime Pareto and the Scrap Reasons Please fix and send back. No rush, probably something easy, but would like by mid December
CS-4864	https://slxdev.atlassian.net/browse/CS-4864 e-mail report has wrong time November 12, 9:24 PM has not happened yet From Subject Received Size In Folder Shoplogix Analytics [EXT] Dashboard: Downtime Reasons Pareto As of Nov 12, 2020 9:24 PM 4:24 PM 262 KB
CS-4388	https://slxdev.atlassian.net/browse/CS-4388 Abbott is ready to trial with Active Directory All documentation is attached as requested in the document "Shoplogix Active Directory" Not sure what format is required for the documentation or what next steps are Please advise Sample URL https://saas136.shoplogix.com/whiteboard/#/

New Features / Status on Long-term Work

PNE-1543

https://slxdev.atlassian.net/browse/PNE-1543

Summary

Currently the Downtime Reason edit dialog box is different when launching from the Dashboard view vs Period Detail. This dialogue box should be made consistent since it presents the same information and has a similar click flow.

Details

Downtime Edit from Dashboard

Downtime Edit from Period Detail

PNE-1530

https://slxdev.atlassian.net/browse/PNE-1530

Summary

Currently the Now option isn't available in the start box for a job from the dashboard view.

Details

Now option is available from Job Command window in period detail view QA - Jobs 2.0 - Job Command
Not available from dashboard see QA - Jobs 2.0 - Dashboard View

PNE-1486

https://slxdev.atlassian.net/browse/PNE-1486

As a user, I need blended expected job rate based on duration of the job within requested time period.
Currently, if we have 2 jobs within requested time period closest to blended expected job rate is AVG([Job Rate]).
Blended expected job rate is already calculated in Whiteboard, for example, in Shift Hours and OEE Waterfall.

Examples:

Analytics:
https://portal-dev.shoplogix.com/app/main#/dashboards/5f104625038892002f1c38c0/widgets/5fd0db0fa37f6a002d5eb2fc

Shift Hours, hour 2:
https://qatesting.shoplogix.com/whiteboard/#/shifthours/FFD4D9CF-EFAA-ED58-0298-AD1A4F13C386/start/20201207T091933.000/gauge1=1&gauge2=8&gauge3=0&timeMetric=0&cycleDP=1&cycleTOL=0&gaugeTOL=0&goalgreen=1&goalyellow=0.75&goalred=0.5&scrapgreen=0.02&scrapyellow=0.05&scrapred=0.1

OEE Waterfall:
https://qatesting.shoplogix.com/whiteboard/#/oeewaterfall/machine/FFD4D9CF-EFAA-ED58-0298-AD1A4F13C386/start/20201207T080000.000/end/20201207T090000.000

Same problem is reproducible for Line Jobs:
Shift Line, hour 4:
https://qatesting.shoplogix.com/whiteboard/#/shiftline/FFD4D9CF-EFAA-ED58-0298-AD1A4F13C386/start/20201202T092540.000/gauge1=1&gauge2=8&gauge3=0&timeMetric=0&cycleDP=1&cycleTOL=0&gaugeTOL=0&goalgreen=1&goalyellow=0.75&goalred=0.5&scrapgreen=0.02&scrapyellow=0.05&scrapred=0.1

Even when 2 jobs are exactly on half of specified time Average Job Rate is still incorrect:

Example:

Actual:
https://portal-dev.shoplogix.com/app/main#/dashboards/5fc4f354a37f6a002d5eab3b/widgets/5fc4f89ba37f6a002d5eab44

Expected:
https://qatesting.shoplogix.com/whiteboard/#/oeewaterfall/machine/E570F0B2-2E93-92ED-9CAE-AD171B401DFA/start/20201202T120000.000/end/20201202T130000.000/yesoee=true